We often perform stucco removals due to water, moisture damage and stucco problems, in this post I would like to take some time to show you how we performed the remediation of this stone Venner chimney.
Custom stucco texture and color match by Rene Munoz Plastering LLC.
We’ve already talked about the eight reasons why stucco and stone fail in this case the chimney was finished with a manufacture veneer stone facade, unfortunately due to the weight the chimney was failing, venner stone had to be removed, the roof was properly supported and the framing was reinforced, even thought the stone was done properly and there was no signs of moisture damage, the weight of the stone was an issue we didn’t encounter before, lesson learned, so next time you know…
Always check the structure and make sure the framing and the structure of your property is suitable for the type of facade you are trying to implement.
Never underestimate the weight of stone on a wooden structure
See how close the color and texture was matched to the exiting, keep in mind that the stucco at the time of the video was wet
We always are looking to improve , pls let us know if you have any questions or suggestions.
Good luck with your project!!
